BATTERY CHANGE AND SERVICING
Servicing and Battery Change of Suunto Zoop
The first generation of Suunto Zoop was introduced by Suunto at about 2011. It was introduced as an entry-level dive computer, packed with functions comparable to higher-end computers in the market, making Suunto Zoop one of the most common dive computer amongst diver.
One of the major difference between the Suunto Zoop and Suunto Zoop Novo, is the number of buttons. Suunto Zoop has only three buttons while Suunto Zoop Novo has four buttons.
Suunto Zoop has been discontinued and replaced by Suunto Zoop Novo in 2016.
CARING FOR YOUR SUUNTO ZOOP
One of the most common problem for Suunto Zoop is the depth sensor and buttons. A good habit for scuba divers who are still using the Suunto Zoop is to thoroughly rinse their dive computer after each dive with lukewarm water, paying extra attention to the sensor found on the underside of your dive computer and depressing the buttons while rinsing it.
SERVICES AVAILABLE FOR SUUNTO ZOOP DIVING COMPUTER
Battery Change of Suunto Zoop
The current service available for Suunto Zoop is only battery change. During the standard battery change, the retainer of the battery compartment is changed as well. There are cheaper services out there but they often do not change the retainer, causing the dive computer to flood.
WHAT CANNOT BE DONE FOR ZOOP
A failed sensor is one of the common issues of the older generation of Suunto Zoop, especially if it has not been well maintained. Unfortunately, if the sensor has failed, there is nothing much that can be done.
Other problems of Suunto Zoop that we will not be able to assist you.
– Stucked Button
– Flooded Unit
– Cracked Screen